A flat tyre mid-ride or a soft tyre before heading out shouldn't mean digging out a bulky floor pump or riding to a petrol station. This electric bike pump is also a genuinely portable bike pump, compact enough to call a mini bike pump without exaggerating, fitting in a jacket pocket and inflating a tyre to an exact target pressure at the press of a button. As a digital bike pump, it uses a real pressure sensor instead of a guess-and-check hand gauge.

A brushless motor and metal cylinder push air at 18L/min up to 150 PSI, fast enough for a full-size bike tyre and strong enough for motorcycle and e-bike tyres too, with 3 preset modes (bike, motorcycle, ball) to avoid manually calculating pressure targets every time.

Why It Stands Out

• Digital pressure display — shows real-time PSI whilst inflating, plus battery level and active mode.
• Adjustable 3–150 PSI target pressure — set the number and the pump shuts off automatically once it's reached.
• 3 preset modes — Bikes (30–130 PSI), Motorcycle (30–43 PSI), and Balls (2–16 PSI, with finer settings for basketball, football, and rugby).
• 18L/min airflow from a brushless motor — inflates a full-size bike tyre quickly instead of pumping for minutes.
• AV/FV compatible — works with both Schrader (AV) and Presta (FV) valves using the included nozzle adapters and extension hose.
• Quiet operation at approximately 75dB — noticeably quieter than typical mini bike pumps in this category.
• 500mAh battery, USB-C charging — about 250 seconds of continuous run time per charge, enough for multiple tyres between charges.
• Auto standby and overheat protection — built-in safeguards for the motor and battery.

Where to Use It

• Before a ride — topping off bike, e-bike or motorcycle tyres.
• As a travel backup — a compact portable bike pump instead of a full floor pump.
• At home — inflating sports balls (basketball, football, rugby) with the same unit.

How It Compares

Setting It Up and Using It

1. Charge fully via USB-C before first use (about 90 minutes).
2. Select a target mode (Bike, Motorcycle or Ball) and use the + and − buttons to set target PSI.
3. Attach the correct nozzle adapter for the valve type (AV/Schrader or FV/Presta), using the extension hose if needed.
4. Press the power button to start inflation; the pump stops automatically once it reaches the target pressure.
5. If an "EoP" error appears, the tyre already has some air in it: power the pump on first, then connect the nozzle to the valve.

Tip: Keep the extension hose in the case so it's always on hand for hard-to-reach valves.

Care and Maintenance

• Wipe down the housing with a dry cloth.
• Keep the nozzle threads clean and free of debris.
• Store away from extreme heat.
• Charge before long-term storage to protect the battery.

Product Specifications

What's in the Box

1 × Electric Bike Pump
Nozzle adapter set (AV/FV, seal kits)
Extension hose
USB-C charging cable
User manual