Cold-weather runs and late-night dog walks usually mean picking one gadget at a time — a head torch for light, or earbuds for music, never both without cables getting in the way. This LED Bluetooth beanie sidesteps that by building a detachable LED light patch and a removable Bluetooth speaker module into one warm knitted hat, so both bits of kit come with you without extra gear to juggle.

Both modules snap onto the beanie's front panel and pop off just as easily, which means the hat itself goes through a normal wash cycle instead of being written off the moment it gets sweaty or muddy. That single design choice is what separates it from most novelty light-up or Bluetooth beanies, where the electronics are sewn in for good and the whole hat becomes hand-wash-only forever.

Why It Stands Out

✓ Detachable LED light, 3 modes — tap once for medium brightness, twice for high, and a third tap switches to a red/blue flashing mode aimed at roadside visibility.

✓ Removable Bluetooth speaker and mic — pairs with your phone to stream music or take calls hands-free, controlled by a smart button on the module itself (play/pause/answer/hang up, plus volume up and down).

✓ Machine washable — because both modules unclip, the knitted beanie underneath goes through a normal wash without putting the electronics at risk.

✓ USB rechargeable — both modules charge over USB and hold their charge for 8+ hours per session.

✓ One size, unisex knit — a stretchy knit fit that suits most head sizes without needing a size chart.

How the Light and Speaker Work

The LED module runs on a simple tap cycle: one tap for a steady medium beam that's plenty for general visibility, a second tap steps up to a brighter high setting for darker conditions, and a third tap switches to an alternating red and blue flash, which pulls more attention than a steady beam when you're walking or running near traffic. The Bluetooth module pairs like any standard Bluetooth headset — hold the button to enter pairing mode, connect once from your phone's Bluetooth settings, and it reconnects automatically after that. The same button handles play, pause and call answering, with a separate volume rocker for adjusting loudness on the go.

Best Uses

Made for anyone active outdoors after dark: night runners and walkers who want visibility and music without wired headphones, commuters and dog walkers who need a free hand, and campers or anyone doing hands-on jobs after sundown who wants light without holding a torch. It also works perfectly well as a plain warm beanie on days you don't need either module attached.

How It Compares

Setting It Up and Using It

1. Charge both the LED module and the Bluetooth module fully via USB before first use.
2. Snap each module onto its mounting point on the front of the beanie.
3. Pair the Bluetooth module with your phone once — it'll reconnect automatically after that.
4. Use the LED module's tap cycle to switch between medium, high and flashing modes as needed.
5. Use the smart button on the speaker module to play, pause or answer calls, and the volume controls to fine-tune the loudness.
6. Before washing, unclip both modules from the beanie and set them aside.

Care and Storage

Always take both the LED and Bluetooth modules off before washing — never machine wash or soak them. The knitted beanie itself can be hand or machine washed on a gentle cycle and air dried. Wipe the modules with a dry or slightly damp cloth only, and store them somewhere they won't get crushed when they're not attached to the beanie.

Product Specifications

What's in the Box

1 × LED Bluetooth Beanie
1 × Detachable LED Light Module
1 × Detachable Bluetooth Speaker Module
1 × USB Charging Cable