Setting up a trail camera used to mean walking back to check it every few days, swapping batteries constantly, and missing half the action because the trigger was too slow. This wildlife trail camera fixes all of that — a 0.3-second trigger captures animals before they clear the frame, 36 infrared LEDs give clear night vision up to 20 metres without disturbing wildlife, and a built-in 5000mAh rechargeable lithium battery keeps it running in the field for months without a single swap.

Why It Stands Out

• ✓ 0.3-second trigger speed — the three-sensor PIR system detects motion and fires the shutter in 0.3 seconds, fast enough to catch deer, elk, and smaller wildlife before they move out of frame; most missed trail-cam shots come down to a slow trigger
• ✓ 36-piece 850nm infrared LEDs — 20m / 65ft night vision — the IR array lights up to 20 metres in complete darkness without visible light that spooks animals; night shots are black and white, day shots full colour
• ✓ 120° PIR detection + 90° lens field of view — wide-angle PIR sensors cover a 120° arc, wider than the lens captures, so nothing approaches from the side undetected
• ✓ 16MP photos + 1080P Full HD video — sharp, detailed stills plus full HD video with audio, giving you both photographic evidence and moving footage
• ✓ 5000mAh rechargeable lithium battery — up to 8 months standby — charges via standard USB (charger not included), inside the camera or removed and charged separately; standby draw is only 0.2mA
• ✓ IP65 waterproof — operates from -20°C to 75°C — the sealed housing handles rain, snow, and freezing temperatures, from a -20°C winter night to a summer heatwave
• ✓ Multi-shot burst — up to 9 photos per trigger — capture 1, 3, 6, or 9 photos per detection to make sure you get at least one well-composed shot
• ✓ 2-inch TFT display with 4-digit PIN security — review images and video in the field without a laptop; the PIN keeps footage private if the camera is found
• ✓ Timelapse mode + multiple recording modes — photo only, video only, combined photo+video, or timelapse for long-term observation of feeding areas or entrances

Where to Use It

• → Hunting scouting — set on deer trails, food plots, or scrapes before season to pattern movement and find entry and exit routes without spending time in the field
• → Wildlife monitoring and photography — document nocturnal activity on your property or a wilderness lot without disturbing natural behaviour
• → Farm and property surveillance — monitor livestock, outbuildings, gates, and remote entrances where there's no power or internet
• → Cabin and cottage security — capture anyone approaching a remote entrance; the PIN protects footage and the IP65 housing survives year-round outdoor exposure
• → Garden and yard monitoring — identify what's raiding your garden, compost, or bird feeders at night
• → Research and nature observation — document seasonal wildlife patterns and species presence over months of continuous operation

How It Works

1. PIR motion detection: Three passive infrared sensors continuously scan a 120° arc. When a warm-bodied animal or person moves through it, the temperature differential triggers the shutter in 0.3 seconds. The PIR interval (1 second to 1 minute) controls how soon it can trigger again, avoiding thousands of redundant shots from a stationary heat source.
2. Infrared night vision: Once ambient light drops below the threshold, the camera switches to night mode automatically. The 36 infrared LEDs emit 850nm light — invisible to people and most animals — lighting the scene up to 20 metres away and producing a clear black-and-white image or video without any visible flash.
3. Rechargeable lithium battery system: The 5000mAh battery slots directly into the camera. In standby it draws only 0.2mA, giving up to 8 months of standby life on a full charge. It recharges via USB either in the camera or removed and charged with a standard phone charger (not included). A 6V/1.5A external power input also supports permanent installation.

Comparison

How to Use

1. Insert a Micro SD card (up to 32GB, not included) into the card slot — format it in the camera before first use via the menu
2. Insert the fully charged 5000mAh lithium battery — charge it first via USB with a standard phone charger (not included) until the indicator turns green
3. Set the date, time, resolution, mode, and PIR sensitivity using the 2-inch TFT display and menu buttons
4. Mount the camera on a tree or post using the included strap, aimed at your target zone — position 60–90cm above ground for deer-level detection, angled slightly downward
5. Set the PIR interval to 1 second for active areas with frequent traffic, or longer for locations where you want to conserve battery and card space
6. Switch to ARM/ON mode — the camera enters standby and triggers automatically on motion; the red LED blinks briefly during setup then goes dark
7. Return to check footage — review on the built-in screen, or remove the SD card and read it on a computer or card reader
8. Tip: For hunting scouting, set PIR sensitivity to Medium rather than High — High sensitivity in open, windy areas can trigger hundreds of false shots from moving vegetation

Care and Maintenance

• ✓ Before extended storage, remove the battery and store it separately somewhere cool and dry — lithium batteries degrade faster when stored fully depleted or in heat
• ✓ Clean the lens and IR LED array with a dry microfibre cloth — avoid touching the lens directly, as fingerprints reduce clarity, especially at night
• ✓ Format the SD card in the camera (not on a computer) at the start of each season to prevent file system errors and missed triggers
• ✓ Inspect the rubber seals on the housing door before each deployment — replace if cracked or deformed to keep the IP65 waterproofing intact
• ✓ In extreme cold below -10°C, battery capacity drops — carry a spare charged battery for longer winter deployments

Product Specifications

What's Included

• 1 × Trail camera (HC801A)
• 1 × 5000mAh rechargeable lithium battery
• 1 × USB cable
• 1 × Mounting strap
• 1 × User manual
• Micro SD card not included. USB charger not included.