Working hands-free after dark is far easier with a head torch that lights up more than just a narrow strip in front of you. This rechargeable LED headlamp pairs a 230° wide-beam strip with a focused spotlight, plus a motion sensor that switches it on and off with a simple wave of your hand.

Why It Stands Out
✓ 230° wide beam + spotlight — the COB strip floods your surroundings with light whilst the XPE spotlight reaches specific points up to 100 metres away.
✓ Motion sensor control — wave your hand within roughly 10 cm to switch the light on or off, gloves and all.
✓ 6 light modes — COB high/low, XPE high/low, SOS strobe and motion sensor mode cover pretty much every situation.
✓ USB rechargeable — no disposable batteries to buy, though note it isn't compatible with USB-C PD fast chargers.
✓ IPX4 water-resistant — built to cope with rain or snow, which makes it well suited to UK conditions.
✓ Lightweight and foldable — the soft silicone body and adjustable strap fold down small enough to slip into a pocket.

Where It Earns Its Keep
Handy for camping, night running, fishing, cycling, reading in bed, and any hands-free repair or maintenance job once the light's gone — whether that's fixing a puncture in the dark or finding your way round the garden shed.
How the Light and Sensor Work
Press the power button to cycle through the 6 modes: COB high, COB low, XPE high, XPE low, SOS strobe and motion sensor. In motion sensor mode, a wave of your hand within about 10 cm of the sensor toggles the light on or off — brilliant when your hands are full or you're wearing gloves against the cold. Runtime depends on the mode: roughly 2.5 hours on the brightest setting, up to around 8 hours on the lowest, averaging about 4 hours of typical use per charge.

How It Compares
| Feature |
This Headlamp |
Standard Single-Beam Headlamp |
Handheld Torch |
| Beam coverage |
230° wide beam + spotlight |
Narrow beam only |
Narrow beam only |
| Hands-free use |
Yes |
Yes |
No |
| Control method |
Buttons + motion sensor |
Buttons only |
Buttons only |
| Waterproof rating |
IPX4 |
Varies |
Varies |
Getting Started
1. Charge fully using the included USB cable before first use (not compatible with USB-C PD fast chargers).
2. Fit the adjustable elastic headband and position the light where you need it.
3. Press the power button to cycle through the 6 light modes.
4. In motion sensor mode, wave your hand within about 10 cm of the sensor to turn the light on or off.
5. Fold the headlamp flat for compact storage when you're done.
Care and Storage
Wipe the silicone body with a dry or slightly damp cloth. Avoid submerging it in water, and let it dry out fully before storing if it gets caught in the rain. If it's going into storage for a while, give it a top-up charge every so often to keep the battery in good health.
Product Specifications
| Light source |
LED (XPE spotlight + COB strip) |
| Brightness |
Up to 350 lumens |
| Beam angle |
230° wide beam + spotlight |
| Spotlight range |
Up to 100 metres |
| Battery |
3.7V, 1200mAh lithium |
| Runtime |
Approx. 2.5–8 hours depending on mode |
| Charging time |
Approx. 2.5 hours |
| Waterproof rating |
IPX4 |
| Weight |
Approx. 68 g (2.4 oz) |
| Certification |
CCC, CE |

What's in the Box
1 × LED Headlamp
1 × USB Charging Cable